D1703-M-DI-E4B
出力レンジ
18.5 kW @ 2200 rpm
性能曲線
特長
Emissions
The D1703-M-DI engine complies with the EPA/CARB Tier 4 emissions regulations.
Durable Power
The Kubota 03-M Series is well known for its industrial applications. With numerous features such as a built-in solenoid, low fan position, and single-side serviceability, this engine provides excellent performance and flexibility. The cooling water passages between the cylinder bores features Kubota’s original casting technology as a countermeasure against the heat load caused by high power density, providing both superior endurance and reliable engine performance. The D1703-M engine offers a seamless transition from EPA Tier 2 to EPA interim Tier 4 by maintaining the same footprint and hardware mounting points with minimal performance changes from EPA Tier 2 engines.
Clean and Quiet Power
The fuel injection pressure has been increased to achieve lower particulate matter (PM) levels. The half-float valve cover and MoS2-coated pistons reduce noise levels compared to conventional diesel engines and decrease vibrations transmitted from the valve area, providing enhanced noise reduction.
Options
Kubota 03-M Series engines offer side power take-off (PTO) in response to the trend of the use of hydraulic control devices in industrial machines. A hydraulic pump can be installed at the two side PTO locations. Indirect-Injection engines are also available.
一般仕様
| 機関名称 | D1703-M-DI-E4B |
|---|---|
| 適合排出ガス規制 | EPA/CARB Tier 4 (NRTC/NTE test mode) + EU Stage V |
| 形式 | Vertical, water cooled 4-cycle diesel engine |
| 気筒数 | 3 |
| 気筒径と行程 mm (in) | 87.0 x 92.4 (3.43 x 3.64) |
| 排気量 L (cu.in) | 1.647 (100.5) |
| 過給方式 | Naturally aspirated |
| 排出ガス後処理装置 | - |
| 定格出力/回転数 *1 kW (HP) / rpm (SAE J1995に基づくグロス値 ) |
18.5 (24.8) / 2200 |
| 最大トルク/回転数 *1Nm (lb-ft) / rpm (SAE J1995に基づくグロス値 ) |
97.4 (71.8) / 1500 |
| 燃焼方式 | Direct injection |
| 燃料供給装置 | In-line pump |
| 外観寸法 *2mm (in) (冷却ファン・後処理装置を除く値) |
547 x 495 x 679 (21.5 x 19.5 x 26.7) |
| 外観寸法 *3mm (in) (冷却ファンを除く・後処理装置 搭載時の値) |
- |
| 乾燥重量 kg (lb) (冷却ファンを除く・後処理装置 付きのエンジンは搭載時の値) |
148 (326) |
Specifications are subject to change without notice.
Dimensions and dry weight are according to Kubota's standard specification.
Dimensions and weight depend on completed specifications.
- *1: SAE J1995 gross intermittent
- *2: Exclude cooling fan and exclude aftertreatment unit
- *3: Exclude cooling fan and include aftertreatment unit on engine
寸法
関連情報
D1703 Lineup
Kubota 03 Series
D1703-M-DI-E4B
Diesel
- 18.5 kW
- 24.8 HP
- @ 2200 rpm
- Emission:
-
- EPA/CARB Tier 4 +
- (NRTC/NTE test mode) +
- EU Stage V
