出力レンジ
49.2 kW @ 2700 rpm
性能曲線
特長
07 Series Concept
The Kubota 07 Series features an engine design developed to meet the various requirements of a wide range of industrial applications. Kubota’s unique cylinder block design was developed using our original casting technology. The engine package is smaller than that of the current 2.4L engine, and yet the displacement is larger. The improved cooling system, with a main water gallery and water passages between cylinder bores as a heat load countermeasure, provides high power density and superior endurance in the reliable Kubota 07 Series. The Kubota 07 Series brings Kubota’s seamless range up to 100 HP.
Emissions
Kubota 07 Series engines comply with EPA / CARB interim Tier 4 level + EU Stage IIIA level. These engines meet emissions regulations with minimal additional required devices. For example, NOx is reduced by mechanical means alone, including the use of a compact cooled exhaust gas recirculation (EGR) system.
Clean and Quiet Power
Kubota’s original E-CDIS (Center Direct Injection System) combustion system, renowned for the clean combustion it provides for the Kubota V3 (DI) Series, has been updated. The fuel injection pressure has been increased and the combustion chamber redesigned to achieve lower particulate matter (PM) levels, resulting in better conditions. In addition, these engines have been designed to reduce transmitted vibrations and radiated sound, resulting in low noise levels.
Options
A side PTO option is available. This engine offers a power take-off (PTO) located at the gear train on the flywheel side that is designed to enable compact positioning of PTO hydraulic devices. Fan positions are available at two heights to enable various equipment configurations.
一般仕様
| 機関名称 | V2607-DI-T-E3B |
|---|---|
| 適合排出ガス規制 | EPA/CARB interim Tier 4 + EU Stage IIIA |
| 形式 | Vertical, water cooled 4-cycle diesel engine |
| 気筒数 | 4 |
| 気筒径と行程 mm (in) | 87.0 x 110.0 (3.43 x 4.331) |
| 排気量 L (cu.in) | 2.615 (159.6) |
| 過給方式 | Turbocharged |
| 排出ガス後処理装置 | - |
| 定格出力/回転数 *1 kW (HP) / rpm (SAE J1995に基づくグロス値 ) |
49.2 (66.0) / 2700 |
| 最大トルク/回転数 *1Nm (lb-ft) / rpm (SAE J1995に基づくグロス値 ) |
220.3 (162.5) / 1600 |
| 燃焼方式 | Direct Injection |
| 燃料供給装置 | In-line pump |
| 外観寸法 *2mm (in) (冷却ファン・後処理装置を除く値) |
623 x 481 x 682 (24.5 x 18.9 x 26.9) |
| 外観寸法 *3mm (in) (冷却ファンを除く・後処理装置 搭載時の値) |
- |
| 乾燥重量 kg (lb) (冷却ファンを除く・後処理装置 付きのエンジンは搭載時の値) |
235 (518) |
Specifications are subject to change without notice.
Dimensions and dry weight are according to Kubota's standard specification.
Dimensions and weight depend on completed specifications.
- 1: SAE J1995 gross intermittent
- *2: Exclude cooling fan and exclude aftertreatment unit
- *3: Exclude cooling fan and include aftertreatment unit on engine
寸法
関連情報
V2607 Lineup
Kubota 07 Series
